This is the start of the fuel system installation.
(1/4/2003)
(1/7/2003) Click me for pics and info
I laid all the pieces and parts out (it's been 9 months since looking at all of this stuff). Most of what you see came with my T-trim that I bought used online.
Once I get all of the pieces (fittings/hoses) together, I will be able to put down on paper all of the necessary part needed to complete this setup.
Proposed Plan: To run a dual fuel system setup. Running the in-tank fuel pump while being able to engage the extra pumps at the flick of a toggle switch on the console. The 88GT is my daily driver and running this fuel system 100% of the time will only create problems.
The following pictures are just the beginning of getting all of the pieces together and labeling each piece w/part number and cost.
| Item Description | Part number | Quantity | Cost |
| Fuel pump | 02 | ||
| Paxton Fuel Filter | |||
| Braided Hose -10 | 15' | ||
| Braided Hose -8 | 15' | ||
| Braided Hose -6 | 15' | ||
| Power Relay | |||
| Paxton Fuel Rail | |||
| Fuel Tank Sump | |||
| Paxton Fuel Pressure Regulator | |||
| 90* AN - 10 fitting | |||
| AN -10 fitting | |||
| AN - 8 fitting | |||
| 90* AN fitting | |||
| 45* AN fitting | |||
| Hose clamps | |||
| Paxton Fuel Rails | |||



